User manual

TREK-753 User Manual 38
5.1 Introduction
To make the hardware easier to access for programmers, Advantech has developed
a demo utility in order to let customers test the functions on TREK-753. This docu-
ment describes detailed information for each Advantech demo utility so that applica-
tion developers can become more familiar with using them.
For technical support, contact Advantech application engineers worldwide. For news
updates, visit our website: www.advantech.com
5.1.1 Execute J1939 Demo Utility
This section explains how to install the Advantech demo utility in Windows XP Pro /
Embedded.
1. Execute the test program called “IMC_Demo”
Figure 5.1 IMC Demo Utility
2. Click “J1939.” Customer may connect directly to the truck; we use a car simula-
tor board below to explain how J1939 protocol can be executed.
First, connect the simulator board to TREK-753 CAN port and console PC, once
the simulator is powered on (connect to the truck), you can start getting the
data. Click “Read” to get the data from the car simulator; click “Read” to transfer
the data to console.