User manual

TREK-775/TREK-776 User Manual 52
Chapter 9 Touchscreen
9.1 Introduction
9.1.1 General information
The touch screen for the TREK-775/TREK-776 series is a resistive touch
screen.
The resistive touch screen incorporates advanced second-generation
resistive, impact-resistant technology, which creates 80% light transmis-
sion. There is also an antiglare surface for greatly enhanced visual resolu-
tions. It also has a new and improved scratch-resistant feature.
For more detailed information, please visit the following websites:
www.dynapro.com
www.amtouch.com.tw
Advantech Co., Ltd. reserves the right to alter the touchscreen at any time
without notice.
9.1.2 General specifications
Please refer to Chapter 1, Section 1.2 of this manual.
9.2 Installation of Touchscreen Driver
The touchscreen driver for Windows contains a native, 32-bit driver and a
32-bit control panel program for the TREK-775/TREK-776 system.
To facilitate installation of the touchscreen driver, you should read the
instructions in this section carefully before you attempt installation.
Important: The following are examples only. Follow the
instructions and pay attention to the onscreen
prompts as they appear.
Note: The CD-ROM drive is designated as "D"
throughout this chapter.