User Manual UbiQ-480 Residential e-Home Terminal
Copyright The documentation and the software included with this product are copyrighted 2009 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Warnings and Cautions Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g.: There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.
Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure.
Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. Keep this equipment away from humidity. Put this equipment on a reliable surface during installation.
UbiQ-480 User Manual vi
Contents Chapter Chapter 1 Introduction..........................................1 1.1 1.2 Overview ................................................................................................... 2 Figure 1.1 Overview of the UBIQ-480.......................................... 3 System Configuration................................................................................ 3 2 Hardware and Software Description ..5 2.1 2.2 Product Features......................................................
UbiQ-480 User Manual viii
Chapter 1 1 Introduction This chapter briefly introduces the UbiQ-480 product.
1.1 Overview The UbiQ-480 residential terminal with Windows operating system built in offers home appliance control, remote monitoring/security and home service functions. In addition, the speed of the processor and the LAN-enabled architecture allow the UBIQ-480 to function as an integrated home gateway. The UBIQ-480 is equipped with an FreeScale i.MX31 523 MHz processor, a 7" touch screen display, onboard Ethernet, and audio, serving as the key of a home/building security & automation solution.
Chapter 1 Introduction Figure 1.1 Overview of the UBIQ-480 1.2 System Configuration A block diagram of the UbiQ-480 Home Terminal based home automation environment is shown in the following diagram: 9 /2*,& &DPHUD ,Q &1 ,QSXW 9 /2*,& 9LGHR ,Q 7, 793 &1 ,QSXW &6, ,QWHUIDFH 9LGHR 9 /2*,& ([WHUQDO 0HPRU\ ,QWHUIDFH (0, 6$0681* .
Led Indicators IR Receiver Camera Mic WiFi (Optional) USB Speaker 6 x Programmable Function Keys I/O Placement VESA Power RS-485 Line-in/out, Video-in, 2 x Lan Ports, 1 x PoE (Optional) 4 TTL DI, 4 TTL DO, USB RS-232 UbiQ-480 User Manual 4
Chapter 2 2 Hardware and Software Description
2.1 Product Features The UbiQ-480 is a smart wall-mount touch terminal for eHome/Building. Multimedia and entertainment are the main features of UbiQ-480 due to its built-in powerful FreeScale i.MX31 processor and Microsoft Windows® CE. A touchscreen and a 7" 16 : 9 true color TFT LCD make interaction with the UbiQ-480 more natural and colorful. The UbiQ-480 can easily communicate with intercom devices with built-in speaker, microphone, line-in and line-out connectors.
Chapter 2 2.2 Mechanical Specifications System dimensions: 261.26 (W) x 196.26 (H) x 37 (D) mm Hardware and Software Description Figure 2.
Figure 2.
Chapter 2 Assembly with Wall Box Hardware and Software Description Side View Screw Spec A Screw Spec B T: 4 mm M: 4 mm L: 10 mm L: 6 mm D: 6 mm 9 UbiQ-480 User Manual
Assembly without Wall Box Screw Spec M: 4 mm L: 6 mm UbiQ-480 User Manual 10
Chapter 2 Overview Hardware and Software Description Figure 2.3 Front View Figure 2.4 Left View Figure 2.
2.3 Hardware and Software Specifications Table 2.1: Hardware Hardware Software Mechanical CPU Freescale i.MX31 523 MHZ System Memory 256 MB SDRAM Data Memory NAND 256 MB flash on board, SD Slot (optional, up to 2 GB) Rear I/O RS-232 x 1; RS-485 x 1, Video-in connector x 1; USB 2.0 x 1; Line-in/out x 1; 1 x 4 TTL level DI, 4 TTL level DO Front I/O USB 2.0 x 1 Hot Keys 6 x programmable function keys Built-in Camera 1.
Chapter 3 3 Design Requirements
3.1 Environmental Specifications Temperature & Humidity ! Operating Temperature: 0 ~ 40° C ! Storage Temperature: 0 ~ 60° C ! Relative Humidity: 0 ~ 95% RH (Non-condensed) Case / Panel Temperature ! Less than 40° C @ 25° C ambient temperature (front bezel) Certifications ! CE ! FCC class B approved ! UL ! CCC ! 8 ~ 500 Hz, 1 G acceleration 3.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
