User`s manual

106

PPC-S153 User’s Manual

If you want to completely disassemble the panel PC, follow the

step-by-step procedures below. Users should be aware that Advan-

tech Co., Ltd. takes no responsibility whatsoever for any problems or

damage caused by the user disassembly of the panel PC. Make sure

the power cord of the panel PC is unplugged before you start disas-

sembly.

The following procedures do not include the detailed disassembly

procedures for the CPU, HDD, and SDRAM; all of which can be found

in Chapter 3.

1. First, unscrew two long screws located on both sides with a

flathead screwdriver and remove them.

Figure B-1: Remove the two long screws