User`s manual

84 PPC-S153 User's Manual
set the system into power saving mode after all tasks are done.
The options are: Yes (Default), No.
Video Off Option
This feature provides the selections for the video display power
saving mode. The option "Susp, Stby → Off" allows the video display
to go blank if the system enters Suspend or Standby mode. The option
"Suspend → Off" allows the video display to go blank if the system
enters Suspend mode. The option "All Modes → Off" allows the
video display to go blank if the system enters Doze mode or Suspend
mode. The option "Always On" allows the video display to stay in
Standby mode even when the system enters Doze or Suspend mode.
The options are: Susp, Stby → Off (Default), Suspend → Off,
All Modes → Off, Always On.
Video Off Method
"DPMS Supported" allows the BIOS to blank off the screen display
with your VGA card which supports DPMS (Display Power Manage-
ment Signaling function). "Blank Screen" allows the BIOS to blank the
screen display by turning off the red-green-blue signals.
The options are: DPMS Supported (Default), Blank Screen.
MODEM Use IRQ
This feature allows you to select the IRQ# to meet your modem's IRQ#.
The options are: 3 (Default), 4, 5, 7, 9, 10, 11, NA.
Note: Under certain operating systems such as Windoes
NT 4.0 (Build 1381), the CD auto-insertion feature
might have some effect on power management. It is
recommended that the CD-ROM drive use the
secondary channel, and that the following Power
Management Setup features be set:
HDD & FDD: Off
IRQ15 (Reserved): Secondary