User manual

UNO-4672 User Manual 36
LEDEn: =0, DIAG LED disable
=1,
DIAG LED enable
LEDS0 and LEDS1: LED flickering speed setting bit (refer to Table 2.16)
SPKEn: =0, Speaker disable
=1,
Speaker enable
SPKS0 & SPKS1: Buzzer alarming
setting bit (refer to Table 2.17)
LED<0...7>: = 0, LED turns off
= 1, LED turns on
Note: UNO-4672 provides built-in examples to show how to
configure DIAG LED and Buzzer. Refer to console
mode examples in C:\Program Files\Advan-
tech\UNO\UNO_IsaDIO\Examples\Console.
(Please install DI/O driver from the UNO CD to use
these examples)
Table 2.27: Programmable LED Control Bit
LEDS1 LEDS0
Light on 0 0
Fast flicker 0 1
Normal flicker 1 0
Short flicker 1 1
Table 2.28: Programmable Buzzer Control Bit
SPKS1 SPKS0
Beep on 0 0
Short beep 0 1
Normal beep 1 0
Long beep 1 1