User manual

VITA-350E User Manual 36
• GPIO Setting page
The “GPIO Setting” Page enables you to define and get the GPIO direc-
tions and values from/to VITA-350E remotely. There are 9 GPIO pins in
VITA-350E. Every GPIO pin could be set to input or output.
“GPIO Direction #n” radio button in “GPIOs Direction/Value” group :
Specify the direction of GPIO #n where n is from 1 to 9.
“GPIO Value #n” combo-box in “GPIOs Direction/Value” group : Spec-
ify the output value of GPIO pin #n when the direction of the pin defined
to output.
“GPIO Status #n” picture in “GPIOs Status” group : Show the current sta-
tus of GPIO pin #n.
“Setup” button in “GPIOs Direction/Value” group : Setup directions and
values of GPIO pins to VITA-350E.
“Get” button in “GPIOs Direction/Value” group : Get directions and val-
ues of GPIO pins from VITA-350E.
“Refresh” button in “GPIOs Status” group : Get the values of GPIO pins
from VITA-350E.