User's Manual
Table Of Contents
- WISE-221X
- Contents
- 1 Product Overview
- 2 Product Specification
- 3 Mechanical and Hardware Installation
- 4 System Configuration
- 4.1 Connection
- 4.2 Configuring WISE-4210-AP with Browser
- 4.3 Install WISE Studio and Configure End Devices
- 4.4 Connection between AP and Nodes
- 4.5 Configure WISE-4210-AP
- 4.6 Setup WISE-221x Network
- 4.7 WISE-221x IO configuration
- 4.8 Access WISE-221x Data by Modbus/TCP Protocol
- 4.9 Push WISE-4210 data by RESTful Web Service
- 4.10 Access WISE-4210 I/O Data by RESTful API
11 WISE-221X User Manual
Chapter 2 Product Specification
Figure 2.5 WISE-2211 I/O Pinout & Application Wiring
2.10 Block Diagram
Figure 2.6 WISE-2210/2211 Block Diagram
2.11 Accessory: CT(Current Transformer)
User can order Advantech accessory, CT(Current Transformer) as below:
P/N Power Current
Range (Primary
Hole sizing
(Primary)
Accuracy Operating
Temperature
96PD-CT241-60A 3~60A 10.0+/-0.2mm Class 0.5 -20~65°C
96PD-CT248-100A 5~100A 15.7+/-0.3mm Class 0.5 -40~65°C
96PD-CT24F-200A 10~200A 20.5+/-0.3mm Class 0.5 -40~85°C
96PD-CT24C-300A 15~300A 35.7+/-0.3mm Class 0.5 -40~85°C
Note! The class designation is an approximate measure of the CT's accuracy.
The ratio (primary to secondary current) error of a Class 1 CT is 1% at
rated current; the ratio error of a Class 0.5 CT is 0.5% or less. (source:
https://en.wikipedia.org/wiki/Current_transformer)