User's Manual
Table Of Contents
- WISE-221X
- Contents
- 1 Product Overview
- 2 Product Specification
- 3 Mechanical and Hardware Installation
- 4 System Configuration
- 4.1 Connection
- 4.2 Configuring WISE-4210-AP with Browser
- 4.3 Install WISE Studio and Configure End Devices
- 4.4 Connection between AP and Nodes
- 4.5 Configure WISE-4210-AP
- 4.6 Setup WISE-221x Network
- 4.7 WISE-221x IO configuration
- 4.8 Access WISE-221x Data by Modbus/TCP Protocol
- 4.9 Push WISE-4210 data by RESTful Web Service
- 4.10 Access WISE-4210 I/O Data by RESTful API
23 WISE-221X User Manual
Chapter 4 System Configuration
4.3 Install WISE Studio and Configure End Devices
Step 1. Download and install WISE Studio through the following link:
https://support.advantech.com/support/new_default.aspx
Step 2. Execute WISE Studio
Step 3. Power up WISE-4210-AP by line power.
Step 4. Use a USB cable to communicate WISE-221x through a computer.
Step 5. Click "Go to Configuration" while it shows "available USB-Serial" in USB-
Serial box. (If device cannot be connected through USB, please install CP210x USB
to UART Bridge VCP Drivers from the following website:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-
drivers)
Step 6. Click "Connect" to access the end device.