User's Manual
Table Of Contents
- WISE-221X
- Contents
- 1 Product Overview
- 2 Product Specification
- 3 Mechanical and Hardware Installation
- 4 System Configuration
- 4.1 Connection
- 4.2 Configuring WISE-4210-AP with Browser
- 4.3 Install WISE Studio and Configure End Devices
- 4.4 Connection between AP and Nodes
- 4.5 Configure WISE-4210-AP
- 4.6 Setup WISE-221x Network
- 4.7 WISE-221x IO configuration
- 4.8 Access WISE-221x Data by Modbus/TCP Protocol
- 4.9 Push WISE-4210 data by RESTful Web Service
- 4.10 Access WISE-4210 I/O Data by RESTful API
25 WISE-221X User Manual
Chapter 4 System Configuration
4.5 Configure WISE-4210-AP
Step 1. The default IP address of WISE-4210-AP is 10.0.0.1, if you are not able to
access WISE-4210-AP, please follow step 2 to search the IP address of WISE-4210-
AP.
Step 2. Configure the Ethernet adapter under the same subnet as 10.0.0.1. In the fol-
lowing figure, the IP address of this computer is configured as 10.0.0.100. Find the
Ethernet box in WISE Studio, and click "Go to Configuration".
Step 3. After the above steps, WISE Stuido will search WISE-42xx series under the
same subnet, and you will find the IP address of WISE-4210-AP in Device Informa-
tion.
Step 4. Enter the IP address of WISE-4210-AP in the browser, or you can keep using
WISE Studio to do further configuration.
The default account and password of WISE-4210-AP to log into web page is root and
00000000. Click "Login".