User's Manual
Table Of Contents
- WISE-221X
- Contents
- 1 Product Overview
- 2 Product Specification
- 3 Mechanical and Hardware Installation
- 4 System Configuration
- 4.1 Connection
- 4.2 Configuring WISE-4210-AP with Browser
- 4.3 Install WISE Studio and Configure End Devices
- 4.4 Connection between AP and Nodes
- 4.5 Configure WISE-4210-AP
- 4.6 Setup WISE-221x Network
- 4.7 WISE-221x IO configuration
- 4.8 Access WISE-221x Data by Modbus/TCP Protocol
- 4.9 Push WISE-4210 data by RESTful Web Service
- 4.10 Access WISE-4210 I/O Data by RESTful API
WISE-221X User Manual 26
Step 5. Go to "Configuration \ Network" to configure LAN port parameters of WISE-
4210-AP.
Step 6. Go to "Configuration \ RF Module" to configure the RF module
RF Operation Mode: WISE-221x devices supports "Push Mode", the communi-
cation from the end node device to AP is uplink only, no downlink.
Data Rate (bps): Lower data rate is helpful of extending communication range,
while higher data rate can reduce the communication time which allows more
data to be uploaded to AP in the same period of time.
Baseband (kHz): If several WISE-4210-AP or sub-GHz networks are in the
same area, users can select different basebands to reduce the interference of
each network. Please be noted that each WISE-221x devices in the same net-
work should use the same baseband as WISE-4210-AP.