Bluetooth HI-FI Wireless Speaker User's Manual Model # ABT-SPK-A8 Page1of 14 6/18/2007
Thank you very much for your purchase of Advantek Networks Bluetooth Wireless Speakers (ABT-SPK-A8). *** IMPORTANT *** Before using this device, please make sure that you fully charge the unit for at least 3 hours before your first use. Picture Sun Visor Picture of AC Adaptor Picture of Cable Picture of Manual 1. Packaging Includes: One Bluetooth Wireless Speaker (ABT-SPK-A8) One 100-240V AC Power Adapter One 3.5mm Audio Cable One Sun Visor Clip One User Manual 2.
♦ Crystal clear stereo sound quality and effect, combined with powerful bass reflection. ♦ Priority answering to incoming phone calls automatically while temperately suspending other functions, auto-resume back to its original function as soon as call is over. ♦ Ideal for Handsfree Car Kit, Conference-Call Device, Amplified Speakers…etc. ♦ Compact design for easy transportation between car, home and office or simply on the road.
3) Connect the adapter into an electrical outlet. Plug the adapter’s connector into charging port. 4) While charging, the amber indicator will stay on, green indicator means the unit is fully charged. Re-charge time after first use usually takes approximately 2 hours. Pairing and establish a connection: Please make sure you have paired the product with Bluetooth AV sources before you start to use.
“remote control” function.
7. Connect ABT-SPK-A8 to Cell-phones with Bluetooth Capabilities. 7.1 Check your cell phone’s user guide, find out the procedure for Bluetooth Connectivity and follow the direction to complete pairing with ABT-SPK-A8 Bluetooth Wireless Speakers. If your cellphone support only HANDSFREE profile, please activate connection from the cell-phone. 7.
then press button to play music. All functional buttons on the device will be disable as soon as “LINE-IN” jack is connected, please operate function from the audio sources directly. 9. Connect to a 2.5mm External Microphone Using rear “MIC-IN” jack for external microphone, simply plug the connector into the jack and turn on the Mic. Please adjust the position of microphone tube for sensitivity and sound quality. 10. Connect to use internet VoIP functions: 10.
Step 2 Choose 「Sound Devices」, and check are 3 items 「Audio In」, 「Audio Out 」and 「Ringing」 all select「Bluetooth SCO Audio」, then press「Save」. Step 3 Make a skype call with your friends by using the ABT-SPK-A8 Bluetooth Wireless Speaker.
10.
Step 3 Select「Bluetooth SCO Audio」, then press「Next」to enter the Microphone Setup Step 4 Select「Bluetooth SCO Audio」, and then press「Next」to enter the Webcam setup Page10of 14 6/18/2007
Step 5 Press 「Finish」 Step 6 Make a MSN call with your friends by using the ABT-SPK-A8 Bluetooth Wireless Speaker.
11. Connect Sun Visor Clip to ABT-SPK-A8 To Assemble: 1. Please follow the direction to place the clip and the 2. Gently slide the clip forward into the groove device as the picture showed and aim the cog of the clip into the rear groove on the device. To Disassemble: 1. Push the stopper of the device down and slide the 2. The clip can be removed after pushing it out clip out of the groove 12.
. Operation Buttons and Symbol Definitions: Six Buttons: 、 、 、 、 、 「Short Click: “+”」 :Clip and release less than 1 second 「Long Press: “++”」 :Press and release for 2 seconds 「Double Click: “v v”」 :Click twice within 0.
Rule15.105(b) :This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates radio frequency and, if not installed and used in accordance with the instructions, it may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.