User`s manual

Software configuration
-27-
RTS Threshold
Set the RTS Threshold, value can be written between 0 and
2347 bytes.
Beacon Interval
Set the Beacon Interval, value can be written between 20 and
1024 ms.
Data Rate
Select the transmission data rate from pull-down menu. Data
rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.
Preamble Type
Click to select the Long Preamble or Short Preamble
support on the wireless data packet transmission.
Broadcast SSID
Click to enable or disable the SSID broadcast function.
IAPP
Click to enable or disable the IAPP function.
802.11g Protection
Protect 802.11b user.
RF Power Level
Select the TX Power from 10-14dBm to 14-17dBm or 17-
20dbm.
ACK Timeout
The Acknowledgement Timeout means from remote to local
data transmission, one parameter to control both
acknowledging action to guaranty those packets have
already be received. Usually, for short distance, keep default
setting is proposed. If there is long distance application,
have minor increased with this parameter will be proposed.
Apply Changes
Click the Apply Changes button to complete the new
configuration setting.
Reset
Click the Reset button to abort change and recover the
previous configuration setting.