User`s manual

Software configuration
-31-
Encryption Key 3
Secret key 3 of WEP security encryption function.
Encryption Key 4
Secret key 4 of WEP security encryption function.
Apply Changes
Click the Apply Changes button to complete the new
configuration setting.
Close
Click to close this WEP Key setup window.
Reset
Click the Reset button to abort change and recover the
previous configuration setting.
2.3.7 Wireless - Access Control
If you enable wireless access control, only those clients whose wireless MAC addresses are in the
access control list will be able to connect to your Access Point. When this option is enabled, no
wireless clients will be able to connect if the list contains no entries.
Item
Description
Wireless Access
Control Mode
Click the Disabled, Allow Listed or Deny Listed of drop
down menu choose wireless access control mode.
This is a security control function; only those clients
registered in the access control list can link to this WLAN
Broadband Router.
MAC Address
Fill in the MAC address of client to register this WLAN
Broadband Router access capability.