User`s manual

Software configuration
-37-
802.1d Spanning Tree
Select enable or disable the IEEE 802.1d Spanning Tree
function from pull-down menu.
Clone MAC Address
Fill in the MAC address that is the MAC address to be
cloned
Apply Changes
Click the Apply Changes button to complete the new
configuration setting.
Reset
Click the Reset button to abort change and recover the
previous configuration setting.
2.3.11 WAN Interface Setup
This page is used to configure the parameters for wide area network that connects to the WAN port
of your WLAN Broadband Router. Here you may change the access method to Static IP, DHCP,
PPPoE or PPTP by click the item value of WAN Access Type.