User`s manual

Software configuration
-57-
Whole System Flood /
Per-Source IP Flood…
Enable and setup prevention in details.
Select ALL
Click the checkbox to enable all prevention items.
Clear ALL
Click the checkbox to disable all prevention items.
Apply Changes
Click the Apply Changes button to save above
settings.
2.3.22 Management - WatchDog Setting
Use ping command to identify whether the router is functional or not. User has to set IP address,
interval and fail count to decide reboot router.
2.3.23 Management - Qos
The QoS can let you classify Internet application traffic by source/destination IP address and port
number. You can assign priority for each type of application and reserve bandwidth for it. The
packets of applications with higher priority will always go first. Lower priority applications will get
bandwidth after higher priority applications get enough bandwidth. This can let you have a better
experience in using critical real time services like Internet phone, video conference etc. You can
adjust the priority of the rules by moving them up or down.
Note: If the total assigned bandwidth of higher priority applications is larger than the maximum
bandwidth provided by the WAN port, the other applications will not get any bandwidth.