Manualshelf

User`s manual

ManualsBrandsAdvantek Networks ManualsNetworkingAWN-54HP-ORT
61626364656667686970
-62-
Fill in the password for web management login control.
Because the password input is invisible, so please fill in the
password again for confirmation purpose.
Clear the User Name and Password fields to empty, means to
apply no web management login control.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the previous
configuration setting.
2.4 Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of
the Access Point. We cover various aspects of the network including network adapters. (The
examples below are illustrated in Windows XP. If you have another operating system, these
solutions will still apply, although the appearance on your computer screen may differ.)
Note: It is recommended that you use an Ethernet connection to configure the Access Point.
1.The computer used to configure the Access Point can not access the configuration menu.
· Check that the LAN LED on the Access Point is ON. If the LED is not ON, check that the cable
for the Ethernet connection is securely inserted.
· Check that the Ethernet adapter is working properly. Please see item 3 (Check that the drivers for
the network adapters are installed properly) in this Troubleshooting section to check that the
drivers are loaded properly.
· Check that the IP address is in the same range and subnet as the Access Point. Please see
Checking the IP Address in Windows XP in the Networking Basics section of this manual.
Note: The IP address of the Access Point is 192.168.1.254. All the computers on the network must
have a unique IP address in the same range, e.g., 192.168.1.x. Any computers that have identical
IP addresses will not be visible on the network. They must all have the same subnet mask, e.g.,
255.255.255.0
· Do a Ping test to make sure that the Access Point is responding. Go to Start>Run>Type
Command>Type ping 192.168.1.254 A successful ping will show four replies.