User`s manual

2 PC Configuration

User needs to configure TCP/IP network settings, Internet access configuration and

Wireless configuration for each system within Wireless Router’s LAN network.

By default, Wireless Router acts as a DHCP server for server version of Windows, it

automatically assigns IP address to each system when systems boot up. For all

non-server versions of Windows, the default TCP/IP setting acts as a DHCP client. If user

chooses fixed IP addresses for client systems, the Gateway of the client system must be set

to the IP address of the Wireless Router and DNS of the client system should be set to the

address provided by your ISP.

2.1 TCP/IP Networking Setup

Checking TCP/IP Settings for Windows 9x/Me

a) Select “Start 



 Control Panel 



 Network”, the window below will appear: