Instruction manual

6
Intent of Use
G2 is a hydro-pneumatic tool designed to place Avdel
®
breakstem fasteners at high speed making it ideal for batch or
flow-line assembly in a wide variety of applications throughout
all industries. It can place all fasteners listed opposite.
The tool features an adjustable vacuum system for fastener
retention and trouble free collection of the spent stems
regardless of tool orientation. See the ‘Operating Procedure’
on page 7 for adjustment instructions.
A complete tool, except the 71210-00039, is made up of
three separate elements which will be supplied individually.
See diagram below.
If you wish to place most of the fasteners in the table
opposite, you can order the 71210-00039 complete tool
comprising of:
• 71210-02000 base tool
• 71210-15000 nose assembly
• Nose tips 71210-05002, 71210-16070 and 07381-
04701, two screwed into the base cover. Fit nose tip as
indicated page 9 or 11.
You can order the above three nose tips and nose
assembly as a nose assembly kit part number 71210-
15100.
• For some fasteners the base tool and nose
assembly and nose tip must be ordered separately.
NOSE EQUIPMENT MUST BE FITTED AS DESCRIBED ON
PAGE 9.
FASTENER
NAME
MM
IN
FASTENER SIZE ( )
AVEX
®
STAVEX
®
AVINOX
®
AVIBULB
®
ETR
BULBEX
®
T-LOK
®
AVDEL
®
SR
MONOBOLT
®
INTERLOCK
®
TLR
®
AVDEL
®
MBC
MBC/LC
AVSEAL
®
3 3.2 4.0 4.3 4.8 5 5.2 6 6.5 7
–
1
/8
5
/32 –
3
/16 – ––––
●●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●●●●
COMPLETE TOOL
71210-00 . . .
*
BASE TOOL
1
1
2
3
1
NOSE ASSEMBLY
NOSE TIP
2
71210-02000
71210-15000
see note 3
2
3
++=
3
2
2
The part number of the base tool remains the same whichever nose assembly, or nose tip is fitted. See the General Assembly
pages 22-23. If a swivel head is fitted, the same base tool must be adapted. See details page 13.
The nose tip part number relates to a specific fastener. If access to the application is
restricted, some extended nose tips are available. See page 10 for selection table.
This single nose assembly will allow placing of non-aerospace fasteners by simply selecting the appropriate
nose tip from the range of type 1 nose tips. Other nose assemblies are available for applications with
restricted access, for aerospace and special fasteners. See tables pages 8 & 10. A nose assembly can
be substituted by a swivel head (see pages 12-15). In this case the nose tip is part of the swivel head.
* ADD 3 DIGITS FROM THE
LAST COLUMN OF A NOSE
TIP TABLE ON PAGE 8 OR 10.
FOR TOOLS WITH SWIVEL
HEADS USE TABLE PAGES 12-
13.
Range of Fasteners
Part Numbering