AMVXMTG10/VXMTG10 10.
Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position.
Congratulations Congratulations on your purchase of DVD Player with drop-down video / monitor. The AMVXMTG10/VXMTG10 has been designed to provide passengers with unlimited content options delivering smiles for many miles. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
Table of Contents Features..............................................................................................................6 Controls and indicators diagram(front view)........................................ 7 Controls and indicators diagram(side view).......................................... 9 Remote Control Operation........................................................................10 Remote Control Functions.........................................................................
Features • 10.1” Digital Thin Film Transistor (TFT) Active Matrix Liquid Crystal Display ( LCD) LED Backlit Monitor • Built-in DVD Player • Last position memory for DVD Player • Four Audio / Video Source Inputs DVD, USB, AV, HDMI . • USB 2.
Controls and indicators diagram (front view) 1. P OWER/SOURCE ( ) Button This button is used to turn the system on/off and to selcet the source . 2. Play/Pause (u/II ) Button This button is used to start playback of a disc or pause a disc. 3. D OWN / Previous ( ) Button Short press to select the source mode and system menu pages. Long press to select previous chapter or track during play the DVD. 4. MENU Select Button This button is used to display and select options on the system menu. 5.
Controls and indicators diagram (front view)-Continued 6. STOP (n) Button -Press the STOP button once: Stops playback. - Pressing the PLAY button again will resume normal playback from where movie was stopped. - Press the STOP button twice and then press the PLAY button to start playback from the beginning of the DVD. 7. EJECT ( ) Button This button is used for ejecting a disc from the disc compartment. 8. Dome Lights Provide additional interior illumination. 9.
Controls and indicators diagram (side view) 1. D VD Disc Insertion Slot For loading and removing discs. Insert a disc with label side facing up. Note: The disc slot indicator is red when a disc is inserted and green when the disc slot is empty. 2. USB INPUT For connection of a USB memory device. This input will also charge a USB device that contains a battery. Note: The USB input supplies up to 2A of charging current. (Samsung Mobile Devices up to 500mA).
Remote Control Operation Battery Replacement 1. Remove the battery cover. 2. Insert two AAA batteries into the battery holder. Be sure to observe the correct polarity. 3. Reinstall the battery cover back into the Remote Control until it locks in place.
Remote Control Functions 11
Remote Control Functions(Continued) * Function control is available on the unit and the Remote Control. ** Function not available in this model. 1. POWER* Press this button to turn the unit ON and OFF. 2. SOURCE* Press to display the Source OSD for DVD, USB, AV and HDMI. 3. DVD Source** No function on this model. 4. D VD Mode Select Button Switches certain function keys on the remote control for DVD function. 5.
Remote Control Functions(Continued) 14. SCAN FORWARD ( ) Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times and normal speed. ) 15. PREVIOUS ( Press to return to the previous chapter or track. ) 16. NEXT ( Press to skip to the next chapter or track. 17. REPEAT Allows the user to repeat a selected chapter, title or all track. 18. A-B REPEAT Allows user to repeat the playback from point A to point B.
Remote Control Functions(Continued) 24. AUDIO Press to display and select audio language in DVD mode. Each time this button is pressed, the language changes. 25. PIX ( Picture Select ) This button is used to make picture adjustments. Use the UP or DOWN direction buttons to select BRIGHTNESS, CONTRAST,COLOR, TINT, or RESET. Use the UP or DOWN buttons to adjust the setting. The OSD will automatically disappear if no adjustments are made within 6 seconds. 26.
Turning the unit on or off 1. P ush in the Screen Release button to unlock the LCD screen. The screen will drop down slightly. 2. P ivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 3. P ress the power button on the unit or the remote control to turn the system on and off. When in use, the internal backlighting will illuminate the controls. 4.
Source Menu The System is capable of accessing six source inputs. To select or change a source, press the source button on the front panel or the Source button on the remote control. The source OSD will appear on the screen as shown in the figure below. Use the + or - cursor buttons on the front panel or the p or q cursor buttons on the remote control to highlight a source. Press the Source button on the front panel or the OK button on the remote control to select the desired source.
Source Menu(Continued) HDMI These Source inputs allow the user to enjoy high-definition digital images and high-quality sound by connecting a HD device such as a Blu-ray player or smartphone with an HDMI output to the system. The HDMI inputs also allow the user to connect with a HDMI mobile phone. Connect your HDMI device with an optional HDMI cable. Smartphones and Tablet require the appropriate adapter for your smart device.
System Menu Setting and Adjustments The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display or set up PARENTAL controls to control DVD playback for children. Using the System Menu 1. Press the System Menu button on the remote. The System Menu appears on the screen as shown in the figure below. There are 5 icons that will appear individually in the upper left hand corner of the System Menu as each option is selected.
System Menu Setting and Adjustments(Continued) 7. If without a Remote control user can use the local key to select the function setting. a.) Menu = Long press to call up the setup menu screen information or return/exit the system menu = Short press function as Down Key b.) u/II Play = Enter Key c.) = Left Key d.) = Right Key PICTURE CONTROL The PICTURE setup functions allows the user to select and set the picture control function. PICTURE BRIGHTNESS, CONTRAST, COLOR adjustments range from 0 to 32.
SYSTEM SYSTEM FMM PLAYER PLAYER FMM FMM MOVE ADJUST MENU EXIT MOVE SELECT MENU EXIT FMM MOVE ADJUST MENU EXIT System Menu Setting and Adjustments(Continued) IRT PICTURE L/R IRT ON SYSTEM MODE PICTURE The system setupAUDIO function allow the user to select SYSTEM the system function. Functions listed below. PLAYER FMM ADJUST MENU AUDIO PLAYER SYSTEM FMM PLAYER ENGLISH ON MONITOR MODE 91.1MHz 91.3MHz 91.5MHz 91.7MHz 91.9MHz 92.1MHz 92.3MHz 92.5MHz 92.7MHz 92.9MHz 93.1MHz 93.3MHz 93.
PICTURE AUDIO DEFAULT DVD ON MONITOR MODE M1 RESET SYSTEM PLAYER FMM System Menu Setting and Adjustments(Continued) MOVE RESET The RESET functions allows all settings options to be reset to factory settings.
TVSYSTEM SYSTEM TV PICTURE PICTURE AUDIO AUDIO ASPECTRATIO RATIO ASPECT 16:9 16:9 PICTURE PICTURE ADULT ADULT SYSTEM SYSTEM ON ON PLAYER PLAYER RATING RATING PLAYER PLAYER LASTMEMORY MEMORY LAST 4:3 LB (Letter Box) Displays the content of theTVDVD title in the 16:9 SYSTEM SAVER aspect ratio.The black bars SCREEN will appear at the top PICTURE ASPECT RATIO and bottom of the screen.
System Menu Setting and Adjustments(Continued) LAST MEMORY SYSTEM DVD playback The last memory function TVallows SCREEN SAVER to begin from the point when playback was last PICTURE ASPECT RATIO AUDIO stopped. The last memory feature allows the user to PASSWORD SETUP SYSTEM RATING turn the last memory feature function on or off.
System Menu Setting and Adjustments(Continued) FMM MODULATION(ON/OFF) This setting allows you to turn the FMM modulator ON or OFF. FM MODULATION ON FMM CHANNEL FMM CHANNEL This setting allows you to select the frequency. The unit has a 100 channel built-in wireless FM Modulator. The FM Modulator can be set from 88.1MHz to 107.9MHz in 0.2MHz steps, i.e.88.1,88.3,88.5,88.9,90.1 etc.
Playing DVD and Audio Discs Playing DVDs When a disc is loaded. Press the DISPLAY button on the remote control to display the status banner. The status banner includes the disc title, chapter audio language , subtitle & angle. Title Selection: Some DVDs contain more than one title (e.g. sitcoms, collections, etc.) Press the numeric (0-9) buttons to initiate a change of chapter title selection. Using the repeat feature to select OFF, Chapter, Title and Repeat All to play the movies contents.
Playing DVD and Audio Discs Use the cursor keys p q t or uand OK to navigate the on screen menus. The USB port can play AUDIO, PHOTO, VIDEO . The following formats are supported: Audio • MP3 • WMA • AAC Photo • JPEG Video* • AVI (MPEG4-DIVX (DIVX 4.0/5.
DVD Basics To get the optimum use out of the DVD Player, please read the following: DVD Region Code The DVD player is preset to a region code at the factory depending on where the DVD player is sold. A DVD from a different region cannot be played in this unit and the unit will display "WRONG REGION”. Region 1- USA, Canada Region 2- Japan, Europe, South Africa, Middle East, Greenland Region 3- S.
DVD Basics HDMI An HD Input is located on the side of the unit. This input can be used for devices with HDMI output ports (such as smartphones, tablets and HDMI devices) and may require the purchase of an HDMI cable and HDMI adapter which is available from your device manufacturer. Each device has unique requirements, please consult with your device or smartphone manufacturer to determine which type of output your device supports.
HDMI Devices HDMI Devices **: Amazon FireTV Stick streaming device: • www.amazon.com and search for FireTV Stick Chromecast media streaming device: • www.google.com and search for Chromecast Roku HDMI streaming device: • http://www.roku.
USB Inputs USB1 Port(User Accessible) The USB port provides two functions: 1. Media port for USB thumb drives: 2. charging: • The USB port will not charge a portable device when the unit is turned OFF. • The USB port will charge a portable device in the following modes: • DVD/USB (Not recommended) • AV • HDMI • It will not charge in USB mode. • For Apple /Android Mobile , It will charge at up to 1 Amps of charging current.
Troubleshooting PROBLEM IR remote inoperative SOLUTION • Verify that the battery in the remote is fresh. • Verify that the remote sensor eye is not obstructed. Disc won't play • Insert a disc with the label side facing the viewer. • Check the type of disc you put into disc tray. This DVD only plays DVD, audio CD and MP3s. • Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played.
Specifcaitons For AMVXMTG10/VXMTG10 Type TFT Active Matrix LCD Resolution 1024 (RGB) (X3) x 600 Pixels 1,843,200 Operation Temperature 32 ~ 113º F (0 ~ 45º C) Storage Temperature -4 ~ 149º F (-10 ~ 65º C) Backlit life 20,000 Hours Video Display System NTSC / PAL / AUTO Video Output 1.0Vp-p @ 75 ohms Power Source 12VDC Dimension (L x W x H) 312mm x 272mm x 65.4mm 12.3in x 10.7in x 2.6in Specifications subject to change without notice.
12 MONTH LIMITED WARRANTY Applies toVOXX Mobile Video Products V O X X E L E C T R O N I C S C O R P.
www.voxxelectronics.com © 2020 Voxx Electronics Corp.
