User`s guide

3) Press the light gray ENTER button on the remote control and the following screen will appear:
4) Use the light gray (up) or (down) arrow on the remote control to highlight FMM ON and press the light gray ENTER button to
turn the FM Modulator on.
1) Repeat steps 1 through 3 above and highlight FMM SELECT
2) Use the light gray (down) arrow on the remote control to highlight FMM SELECT and press the ENTER button, the following
screen will appear
3 Use the light gray (up) (down) (left) (right) buttons on the remote control to select a frequency not used by a radio station
in the area. Press the light gray ENTER button to select the highlighted frequency.
: The menu will time out after a short period, or press the SYSTEM MENU button to turn off the menu.NOTE
pq
q
pq t u
.
)
FMM SELECT
19
FMM SELECT
88.1 MHz 89.7 MHz
88.3 MHz 89.9 MHz
88.5 MHz 90.1 MHz
88.7 MHz 90.3 MHz
88.9 MHz 90.5 MHz
89.1 MHz 90.7 MHz
89.3 MHz 90.9 MHz
89.5 MHz 91.1 MHz