User`s guide
The LED will turn off when the controller is powered off
or
is
in
sleep mode.
In
order to avoid conflicts between working controllers, each is issued a unique
10.
However, if there is a need to re-pair the
controller and the transceiver, simply press the "Force Link" button on the transceiver first, then on the controller. The Link LED
will flash for a
few
seconds and the receiver will begin to search the controller.
Safety Precaution:
Follow
the battery manufacturer's
instructions
as well as these
important
safety
tips. Do
not
open
or
mutilate batteries as they
might
leak dangerous chemicals.
Sleep Mode:
The controller will revert to sleep mode after five minutes
of
inactivity or when the controller is without an active link for a
period
of
two minutes. The Pad will wake from sleep mode by pressing any
of
the following keys "Mode"", "Select", "Start",
"L3" or "R3".
Low Power Warning Function:
Under low battery conditions, the Mode LED will flash and the vibration motors will automatically turn off.
Vibration:
The controller's default vibration setting is on.
To
turn off the vibration function, press the vibration button once. The controller will vibrate twice to confirm.
To
turn the vibration on, press the vibration button once and the controller will vibrate once to indicate vibration is active.
Safety Precaution: Stop
using
this
unit
immediately
if
you begin
to
feel tired
or
if
you
begin
to
feel
discomfort
or
pain
during
use. Do
not
use the vibration
function
if
you
have an ailment
or
injury
to
the bones,
joints
or
muscles
of
your
hands
or
arms.
16