User`s guide

4) Use light gray'" or ~ buttons to change the picture control setting.
5)
To change another picture control setting press the SYSTEM MENU button and select another picture control using the light gray
.. or T buttons. Repeat step 4 to change the picture control setting.
6)
To reset the picture control settings to the factory default settings, enter the picture control menu and use the light gray T button to
highlight RESET and press the light gray ENTER button.
NOTE: The light gray PIX control and light gray VOLUME and + buttons on the remote control can also be used to adjust the picture
control settings. When using this method highlight RESET and press the or
+ button to reset the picture controls to factory default
settings.)
FMM
FMM ON/OFF options - Turns the wireless FM Modulatoron or off.
1) Press the SYSTEM MENU on the remote control, the following screen will appear:
SYSTEM MENU
PICTURE CONTROL
FMM
OSD LANGUAGE
SOURCE DEFAULT DVD
SCREEN MODE
2). Use the light gray T (down) arrow on the remote control to highlight FMM as shown below:
SYSTEM MENU
PICTURE CO NTROL
FMM
OSD LANGUAGE
SOURCE DEFAULT DVD
SCREEN MODE
18