User`s guide

Parental control settings
When using a cable other than the supplied AV
cable
• RFU adaptor • AV cable (supplied) • S VIDEO cable • Component AV cable
Picture quality varies depending on the type of cable used. Use the information
below to determine the best connection method. If you use a cable other than the
supplied AV cable, refer to the instructions supplied with the cable.
High quality
Picture quality scale
TV Cable type
A TV with component video input connectors
Component AV cable
(SCPH-l 0490 U)
A TV with S VIDEO inputs S VIDEO cable
(SCPH-I0480 U)
A TV without video inputs
RFU adaptor
(SCPH-I 0071)
From the control panel, select ~ (Setup) -+ "Custom Setup" -+ "Parental
Control".
Follow the on-screen instructions
to register or enter the password. After the
password
is registered or entered, proceed through the various screens to select a
region and parental control level.
Hints
• If you select "Other" in the region options, refer to the User's Guide ( •• ~ page 8)
for a list
of region codes.
• For the parental control level, note that the lower the value, the stricter the
restriction.
• To clear the parental control setting, set the option to "Off'.
•
To change your password, select "Change Password" from the parental control
options and follow the on-screen instructions
to complete the operation.
This scale is intended only as a reference. Depending on the product or condition of
your TV, the picture quality may
be different.
Start DVD playback. When prompted by the system, select "Yes", and then enter the
password.
Hints
• You cannot change the parental control setting without a password.
• When DVD playback is stopped, the parental control level will return to its default
setting.
• If you forget your password, see "Troubleshooting" ( •• ~ page 18).
15