Installation guide
15
INSTALLING ADVDLX10 VIDEO SYSTEM
Mounting
Bracket
Headliner
Roof
4 x M5
Screws
Video Unit
Front
of
Vehicle
Mounting Bracket
Mounting Holes
Installing the ADVDLX10 System
1. Make all electrical connections.
2. Attach the ADVDLX10 unit to the mounting bracket using four M5 screws.
CAUTION: The M5 screws are supplied in three dierent lengths (10mm, 20mm and 40mm) to facilitate proper installation. Use extreme caution
when using these screws to avoid damage to vehicle roof or other components, wiring, etc.
CAUTION: Do not trap any wiring between the bracket and the unit.
ADVDLX10
NOTE: Do Not over
torque/tighten M5
screws.