Owner`s manual

5
CONTROLS AND INDICATORS DIAGRAM
SIDE VIEWS
1. DVD Disc Insertion Slot
For loading and removing discs. Insert disc with label side facing up.
2. AUX IN
This jack is used to supply external audio and video inputs to the unit.
Note: In order to connect an external A/V source, the 3.5mm to RCA
connectors pigtail is required.
3. USB INPUT
Allows for the connection of an USB memory device.
ADVDLX10 System
The ADVDLX10 System has an option that allows the user to select from
two IR transmit and receive codes (M1 or M2). This feature can be used
when using two ADVDLX10 sytems in the same installation or if the vehicle
has RSA (Rear Seat Audio) that uses an “A” channel headset. The ADVDLX10
system comes factory set to M1. When in the M1 mode, the unit will
respond to remote commands when M1 is selected on the remote control
and will transmit audio on the A channel. When in the M2 mode, the unit
will respond to remote commands when M2 is selected on the remote
control and will transmit audio on the B channel.
Note: Use 2-channel IR headphones set to CH B when the monitor is set to
M2 mode.
Note: M1 will appear on the screen for 4~5 seconds.
Selecting a Monitor Code (M1 or M2)
1. Power ON the unit and wait until M1 on the OSD appears. M1 will
appear on the screen for 4~5 seconds.
2. To change the monitor code, press the System Menu button.
3. Use the p or q cursor buttons to select the Monitor Mode menu
option. Press OK to conrm the setting.
4. Use the p or q cursor buttons to select the desired monitor mode,
then press OK to conrm the setting.
5. Press the M2 button on the remote.
6. Press the System Menu button on the remote to exit.
23
1
FMM OFF
M2
DVD
IRT OFF
FMM 88.3MHz
M1
AUX/GAME
IRT ON
SYSTEM MENU
OSD LANGUAGE
DEFAULT DVD ON/OFF
SCREEN MODE
FM MODULATOR
MONITOR MODE
WARNING
SETTING THE MONITOR TO THE M2 MODE WILL
REQUIRE USING 2-CHANNEL HEADPHONES.
USE THE DOWN KEY ON THE REMOTE CONTROL
TO SELECT M2 AND PRESS OK TO SET THE
MONITOR TO M2 MODE
TO REMAIN IN THE M1 MODE PRESS OK
M1
M2