Setup guide

Advidia A-46 Mini Dome
10/16/2012 Page 16
C. Configuring Live View Parameters
You can select the stream type and adjust the image size on the live view page.
1. Click or tab under the menu bar of the live view
interface to select the stream type as main stream or sub-stream for live viewing.
2. Click each tab to set the image size to 4:3, 16:9, original or
auto.
D. Configuring Network Settings
D.1 Configuring TCP/IP Settings
TCP/IP settings must be properly configured before you operate the camera over network.
1. Enter TCP/IP Settings interface:
Configuration > Basic Configuration > Network > TCP/IP
Or Configuration > Advanced Configuration > Network > TCP/IP
Figure 2-1 TCP/IP Settings
2. Configure the NIC settings, including the NIC Type, IPv4 Address, IPv4 Subnet Mask, IPv4
Default Gateway, MTU settings and Multicast Address.
3. If the DHCP server is available, you can check DHCP checkbox to automatically obtain an IP
address and other network settings from that server.
4. If the DNS server settings are required for some applications (e.g., sending email), you should
properly configure the Preferred DNS Server.