Setup guide

Advidia A-46 Mini Dome
10/16/2012 Page 18
E. Configuring Video and Audio Settings
E.1 Configuring Video Settings
1. Enter the Video Settings interface:
Configuration >Basic Configuration > Video / Audio > Video
Or Configuration > Advanced Configuration > Video / Audio > Video
Figure 2-1 Configure Video Settings
2. Select the Stream Type of the camera to main stream (normal) or sub-stream.
3. The main stream is usually for recording and live viewing with good bandwidth, and the sub-
stream can be used for live viewing when the bandwidth is limited. Refer to the Section
Configuring Local Parameters for switching the main stream and sub-stream for live viewing.
4. You can customize the following parameters for the selected main stream or sub-stream:
Video Type:
Select the stream type to video stream, or video & audio composite stream. The audio signal
will be recorded only when the Video Type is Video & Audio.
Resolution:
Select the resolution of the video output.
Bitrate Type:
Select the bitrate type to constant or variable.
Video Quality:
When bitrate type is selected as Variable, 6 levels of video quality are selectable.
Frame Rate: