Setup guide

Advidia A-46 Mini Dome
10/16/2012 Page 19
Set the frame rate to 1/16~25 fps. The frame rate is to describe the frequency at which the
video stream is updated and it is measured by frames per second (fps). A higher frame rate is
advantageous when there is movement in the video stream, as it maintains image quality
throughout.
Max. Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the higher video
quality, but the higher bandwidth is required.
Video Encoding:
When the Stream Type of the camera is main stream, the Video Encoding standard can be
set to H.264 or MPEG4.
When the Stream Type of the camera is sub-stream, the Video Encoding standard can be set
to H.264, MJPEG.
I Frame Interval:
Set the I-Frame interval to 1~400.
5. Click to save the settings.
E.2 Configuring Audio Settings
1. Enter the Audio Settings interface
Configuration > Basic Configuration > Video / Audio > Audio
Or Configuration > Advanced Configuration > Video / Audio > Audio
Figure 2-1 Audio Settings
2. Configure the following settings.
Audio Encoding: G.711 ulaw, G.711alaw and G.726 are selectable.
Audio Input: MicIn and LineIn are selectable. Select MicIn to connect the microphone and
select LineIn to connect the pickup.
3. Click to save the settings.