Setup guide

Advidia A-46 Mini Dome
10/16/2012 Page 20
F. Configuring Display Settings
You can set the image quality of the camera, including brightness, contrast, saturation, hue,
sharpness, etc.
Note: The Display parameters vary depending on the camera model.
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the camera.
Figure 2-2 Display Settings
Descriptions of parameter configuration:
Exposure Time:
Speeds from 1/25 to 1/100,000 are selectable.
Iris Mode:
Auto and Manual are selectable.
Video Standard:
50 Hz and 60 Hz are selectable.
Day/Night Switch:
Day, Night and Auto are selectable.