Setup guide

Advidia A-46 Mini Dome
10/16/2012 Page 27
I.4 Rebooting the Camera
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click <Reboot> to reboot the network camera.
Figure 2-1 Reboot the Device
I.5 Restoring Default Settings
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click <Restore> or <Default> to restore the default settings.
Figure 2-1 Restore Default Settings
I.6 Upgrading the System
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click <Browse> to select the local upgrade file and then click <Upgrade> to start remote
upgrade.
Note: The upgrading process will take 1 to 10 minutes. Please don't disconnect power of the camera
during the process. The camera reboots automatically after upgrading.
Figure 2-1 Remote Upgrade