Setup guide

Advidia A-46 Mini Dome
10/16/2012 Page 29
SADP Software Introduction
SADP (Search Active Devices Protocol) is a kind of user-friendly and installation-free online device
search tool. It searches the active online devices within your subnet and displays the information of
the devices. You can also modify the basic network information of the devices using this software.
 Search active devices online
o Search online devices automatically
After launch the SADP software, it automatically searches the online devices every 15
seconds from the subnet where your computer locates. It displays the total number and
information of the searched devices in the Online Devices interface. Device information
including the device type, IP address, port number, gateway, etc. will be displayed.
Figure A.1.1 Searching Online Devices
Note: Device can be searched and displayed in the list in 15 seconds after it is online; it will
be removed from the list in 45 seconds after it is offline.
 Search online devices manually
You can also click <Refresh> to refresh the online device list manually. The newly found
devices will be added to the list.
Note: You can click <UP Arrow> or <DOWN Arrow> on each column heading to order the
information; you can click to expand the device table and hide the network parameter
panel on the right side, or click to show the network parameter panel.
 Modify network parameters
1. Select the device to be modified in the device list and the network parameters of the device