B-33 User’s Manual 18x Zoom H.
Advidia B-33 User’s Manual Table of Contents 0. Precautions 3 1. Introduction 4 Package Contents............................................................................. 4 Features and Benefits ...................................................................... 4 Safety Instructions ........................................................................... 5 Physical description ......................................................................... 7 Basic Connections .....................
Advidia B-33 User’s Manual 0. Precautions Read these instructions You should read all the safety and operating instructions before using this product. Heed all warnings You must adhere to all the warnings on the product and in the instruction manual. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment.
Advidia B-33 User’s Manual 1. Introduction Package Contents 18x Zoom H.264 4 Megapixel IP IR D/N PoE Outdoor Box Camera with Advanced WDR Quick installation Guide Terminal Blocks for Power, DI/O and Serial Port Features and Benefits This is a cutting edge network video surveillance camera. It can capture, compress and transmit real time video in excellent quality (8 FPS 4Megapixel, 2032 x 1920).
Advidia B-33 User’s Manual With the innovative embedded Image Signal Processor (ISP), this camera responds to changing lighting condition with customized algorithm. This allows for clear image with very little noise at night. H.264/MPEG-4/MJPEG Triple Codec Dual Streaming This device supports 3 compression formats, H.264, MPEG-4 and MJPEG. It brings superior image quality at 8 frames per second up to resolution of 2032 x 1920 pixels, and offers up to 15 frames per second in Full HD 1080p (1920 x 1080).
Advidia B-33 User’s Manual cause hazards. Water and Moisture Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool and the like.
Advidia B-33 User’s Manual Physical description MicroSD / Micro SDHC Card Slot Serial Port Input Power LED Reset Button Audio Input / Output Ethernet Port DC 12V Power Input 1) Micro SD / Micro SDHC Card Slot* Digital Input / Output Insert your Micro SD card here for local recording on camera 2) Power LED This LED light will indicate current camera status.
Advidia B-33 User’s Manual Pin Number RS422 RS485 1 TX+ D+ 2 TX- D- 3 RX+ N.C. 4 RX- N.C, 6) Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.) Step 3: Reconnect the power cable while continuing to hold the reset button. The red Power LED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another second and turn off again.
Advidia B-33 User’s Manual • 1 Transistor Outputs - For connecting external devices such as relays and LEDs. Connected devices can be activated by Output buttons on the Live View page or through video management software. Connect DO1 and DO2 to their closest 12V pin to activate. • 2 Digital Inputs - An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc.
Advidia B-33 User’s Manual Basic Connections Follow the procedures below to connect the IP device to the respective apparatuses. If you have a PoE(Power over Ethernet) supported switch or injector: 1) Connect your IP Box Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45 connector. 2) Connect your Switch / Injector to PC with another CAT5 / CAT6 network cable.
Advidia B-33 User’s Manual 2. Accessing Camera If you have DHCP server / router in your network: Many network server / routers are able to automatically provide IP addresses through DHCP. If you are using such a network, just plug in your computer and IP Box Cam into the network and your IP device will acquire network address by itself. Find and access the device with our IP Utility program. If you do NOT have DHCP server / router in your network: 1.
Advidia B-33 User’s Manual Please set the settings as below. IP address: 192.168. 0.xxx Subnet mask: 255.255.255. 0 (NOTE: xxx should be a number from 1 to 254 except 100, which is used by the IP device. Please also make sure that no two equipments use the same IP address in the same network..) 4. Open Internet Explorer (Version 6.0 or above) , and type in the Default IP: 192.168.0.100 5.
Advidia B-33 User’s Manual If you are using a single camera, this is enough to access the device. If you are using multiple devices, you need to change the current device to another unused IP address, so that when the next device is connected to the network, no two devices use the same IP. Please perform the following steps. 7. Go to IP Settings -> Connection Type 8. Change the IP mode to Static. 9. Change the IP to 192.168.0.101 or any other unused IPs. Do NOT use the PC’s IP address or 192.168.0.100.
Advidia B-33 User’s Manual 10. Click “Apply” 11. Please go to System -> Save & Reboot, and click ”Apply”. Internet Explorer will close after a few seconds. This is normal. 12. Wait for 30 seconds, and open IE again to connect to the new IP. (In this example, 192.168.0.101). For the second device or more you add into the network, please type the correct IP. 13.
Advidia B-33 User’s Manual 15
