WARNING To prevent firs of shock hazard. do not expose this appliance to rain of moisture. CAUTION TO PREVENT ELECTRONIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY INSERTED WITHOUT CAUTION EXPOSING ANY PARTS OF THE BLADES. 00 NDT OPE.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment This product was designed arid manufactured to meat strict quality and safety standards. Hers are, However, some installation and operation precautions which you should be particularly aware of. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instructions The safety and operating instructions should be retained for future reference.
Power-Cord Protection Power-supply cords soul be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at pigs. convenience receptacles, and the point where they exit from the appliance. Protective Attachment Lug -Tha product is equipped with an attachment plug having overload protection. This is & safety feature. Ses Instruction Manual for replacement or resetting of protective device.
INTRODUCTION Congratulations on the purchase of your new Wireless Stereo Speaker System, This systems uses the latest 00 MHz High Frequency Radio Signal that can lastly travel through walls, floor, ceilings or partitions to allow the finest stares sound reproduction. You can use your speakers almost anywhere in and around your Home or for outdoor activities, ust place them in the location of your choice. There is no nipped t worry about cable connection between the transmitter and speakers.
CONTROL LOCATIONS TRANSMITTER 1) LED indicator {Power ON) 2) Power OFF Switch and Channel Selector 3) AUDIO IN Jack (L) — Connect to Music Source 4) AUDIO IN Jack (R) — Connect fo Music Source 8) DC Input Jack SPEAKER 8 Frequency Channel Selector 7) Bass Control Knob 8 Power OFF and Velum Central Knob 9 DC input Jack 10) Battery Compartment
SETTING UP THE TRANSMITTER You need fo properly set up the Transmitter to send a wireless signal to the speakers. There are two things. you must do, First, provide power to the Transmitter, and second, connect the Transmitter to the Audio Source (Receive, CD/Radio/Cassette Portable Player, TV, ei). (A) DC OPERATION Your Transmitter is supplied with a Battery Compartment. insert for (4) x AA Alkaline batteries (not supplied) in the battery slots as indicated, making sure and polarities are properly aligned.
OPERATION 1) Folio these steps to obtain maximum listening performance. 2) Make sure that the Transmitter and Speaker are set up according to the procedures given in the manual, 3) Turn on your Audio Source (Receiver, Portable CD/Radio/Cassette Player, TV, etc). 4) Switch the Transmitter to a Frequency Channel (Chandelier that has no interference. Refer to below for Precision Frequency Lock-in Tuning.
TROUBLESHOOTING if you follow all the instructions In this manual, you should have no problems with your Wireless Speaker System. However, should you encounter any trouble making the system wrk, please read the TROUBLESHOOTING section carefully. Do not ret them to your dealer immediately! Check and follow these guidelines ~ you probably can resolve the problem without much difficulty.
SPECIFICATIONS TRANSMITTER Operating Frequency (3-Channels) Right; 925. 8,926,6,927 Zomba Left; MHz Chanel 1 :L003 4 RO26.6 Chennai 2:L902 8 R925.8 Chan net R927 4 Power Sources 2) AC Adapter (AG 120/60 Hz-DE $V 200mA ) Supplied for Transmitter, b) DC four Alkaline Batteries (Not included) Transmitter Dimensions. 4318" (WHD) Output Power 10 Watts Multichannel Receiving Frequency L: R: 918.