Quick Start Guide
Contents of this package Shuttle EMV chip&pin terminal USB cable to charge your Shuttle via your computer’s USB port or USB power plug (not included) 2
Register your app and Shuttle 1 Before you can accept payments, you must download and register your Adyen app and Shuttle: STEP 1 Install the Adyen app via iTunes or Google Play store 1 and launch it 2 STEP 2 Fill-in your login credentials. These were provided to you during registration, and need to be entered once 2 STEP 3 Power on your Shuttle, either (i) by connecting it to a power supply via the USB cable, or (ii) by pressing the small rectangular button on the left side.
STEP 5 Register your app and Shuttle FOR iOS Pair your Shuttle with your iOS device Open the Bluetooth menu of your smartphone or tablet via Settings Bluetooth. Make sure Bluetooth is enabled 5 5 Select the device that corresponds with the serial number of your Shuttle (see 4 on page 3). A PIN code will appear on the Shuttle and your iOS device. Click ‘Pair’ on your iOS device, and press the ‘Enter’ button on your Shuttle. The status should change to ‘Connected’. Configure device Start the Adyen app.
STEP 5 Register your app and Shuttle 7 FOR Android phone/tablet Make sure Bluetooth is enabled (consult your smartphone/tablet manual). Start the Adyen app. Select ‘Terminals’ from the menu. Select the device corresponding to the serial number of your Shuttle. 7 A passkey screen should appear on your Android device, click ‘OK’. 8 8 After a few seconds the message “Completed successfully” appears. You are now ready to accept payments.
step 6 pRoCess a tRansaCtion Make sure your shuttle is switched on (press the enter button to awake from sleep, or on/off button to boot). enter the amount and reference (optional) in your app. press ‘Charge’ to start your transaction. When the display on the shuttle shows ‘please insert or swipe card’, hand over the shuttle to the cardholder. follow the instructions on the screens.
for some cards the app will ask for the signature of the cardholder.
shuttle sleep Mode suppoRt to save battery power, your shuttle automatically goes into sleep mode after five minutes of inactivity. You can access our FAQ from the menu in the Adyen app, or Visit our support website at https://support.adyen.com To wake your Shuttle from sleep mode: press Enter once. or To put the Shuttle in sleep mode manually, press and hold the Cancel button for one second. Shuttle Contact us via e-mail: possupport@adyen.com (feedback welcome!) Made for: Android v.4.
