User's Guide

Button Controls
Pythia™ earphones are equipped with 3 mechanical buttons: Top, Bottom, and Power. Button
operations include:
● Single Short-Press Top Button  = Next
● Double Short-Press Top Button  = Repeat Current Step
● Single Long-Press Top Button  = Quit Current Process
● Single Long-Press Bottom Button = Send Help Request
● Single Short-Press Bottom Button =  Volume Down 1 Increment
● Double-Short-Press Bottom Button =  Volume Up 1 Increment
● Press Power Button  = On, Off
● Triple-Long Press  = Help/Send Alert
● All interactions except record requests and volume controls can be accomplished with
voice commands and/or mechanical button on the earphone
Charging the Earphone:
The Pythia™ earphone uses a state-of-the-art lithium polymer (LiPo) battery for maximum use
between re-charging. You’ll hear a series of verbal messages when battery power depletion is
imminent:
● When battery power reaches 10%, system says, “10% power remaining.”
● When battery power reaches 5%, system says, “5% power remaining.”
● When battery power reaches 2%, system says, “Shutting down; please stand by.”
Each Pythia™ earphone is equipped with a micro-USB interface to facilitate battery charging.
Connect a regular micro-USB cable to the earphone and a power source.
● The system’s firmware is set to fully recharge the earphone battery in about 30 minutes.
WiFi Technology
Pythia™ uses pre-selected 802.11n WiFi channels to operate the system. Faster WiFi speeds
deliver faster system performance. The minimum recommended speed is 60mbps.
Thanks to Pythia™‘s WiFi capability, there’s no Bluetooth pairing, and no phone; just turn it on,
say your password, and go!
June 8, 2020 9