Instruction manual

Rev. P-071510 P/N VDC12248-MNL

BatteryMINDer

Model 12248

Page 30

DETAILED SPECIFICATIONS - VDC Model No. 12248 (con’t.)

• Charging Output Control Characteristics

• Charging Flow : Battery condition detect>Soft Start Charge>Bulk Charge>Absorption

Charge>Sulphate Check>Float Charge

• Soft Start Charging Activity conditions: Battery Voltage is over 3 Vdc and less than 10.5Vdc

(the charger will start at 2A mode & Gel mode automatically)

• Soft Start Charging output current control: (2A / 4A / 8A mode) 0.5 / 1 / 2 ±0.25 Adc

• Soft Start Charging Time Limited: (Stop charge If battery cannot be charged over 10.5V after

6 hrs, error LED flash indicated) 6 ±0.25 Hours

• Bulk Charging Activity conditions: Battery Voltage is over 10.5Vdc (the charger will start at

2A mode & Gel mode automatically)

• Bulk Charging Current control at 2A mode: (Selected by pressing Charge Rate Button)

2 +0.35 / -0 Adc

• Bulk Charging Current control at 4A mode: (Selected by pressing Charge Rate Button)

4 +0.40 / -0 Adc

• Bulk Charging Current control at 8A mode: (Selected by pressing Charge Rate Button)

8 +0.45 / -0 Adc

• Max. rated output voltage and current: 13.0V at 8Adc 14.6V at 6.5Adc

• Bulk Charging Time Limited: (Stop charge If battery cannot be charged reach 14.1/14.4/14.6-V

after 20 hrs, error LED flashes) 20 ±1 Hours