Installation & Operation Manual

Wilat_Op_Man_23Oct08.doc CONFIDENTIAL
Aearo Technologies Page 20 of 21 18/07/2007
9. Specifications
Power Supply (WRU)
Battery Pack 3.7V Li-Ion
Full Charge Operation 10 hours run time
Full Recharge Time ≈4 hours
Abbreviated Charge Time ≈15 min.
Battery Charger Input 110VAC/4.2VDC 60 Hz
Power Supply (WBU)
AC/DC Adaptor (supplied) Input: 100 - 240VAC, 50 - 60Hz
Output: 12VDC/1.5A
Energy Star Compliant Level IV
Physical Characteristics
Nominal Weight - WRU (w battery) 3.0 ozs. (86g)
Operating Temperature Range 55°F - 90°F
Operating Humidity Range 30- 80%, non-condensing
Safety/Regulatory Compliance Standards:
The E-A-RTONE WiLAT System meets or exceeds the following standards;
 FCC Compliance* (as a Class A, Digital Medical Device)
 UL 60601
 IEC60601-1
 CAN/CSA C22.2 No. 601.1
*NOTE 1: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense. Any changes or modifications to this device
not expressly approved by Aearo Technologies could void the user’s authority to operate
this equipment.
*NOTE 2:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.