User Manual
Peltor™ DECT-Com II™
wireless intercom system
DC2032 Battery Carrier
Read this information carefully before use and save it for
future reference!
USER INSTRUCTIONS
Open the battery carrier and install 3 or 6 batteries of type AA;
alkaline or rechargeable. When the batteries are installed,
attach the battery carrier to main unit to extend the working
time of the main unit.
CHARGING
Rechargeable batteries must be taken out of the DC2032 and
charged with an external charger according to its specication.
Batteries can not be charged this battery carrier placed in the
DECT-Com holders DC2064 or DC2068.
INSTALLING THE BATTERY CARRIER
TECHNICAL INFORMATION
Number of batteries: 3 or 6
Usage temperature: -26°C to +55°C
Storage temperature: -55°C to +70°C
Weight without batteries: Approximately 80 g
Weight with 6 batteries: Approximately 250 g
Notice: Remove the batteries from the unit if it should not be
used in a month’s time, or longer.
WARRANTY
Two year guarantee of conformity with the contractual
specications of the quality and performance of the goods. Full
information about the Peltor warranty is available on request.
“Non-conformity goods“ should be returned to your 3M Peltor
dealer, or one of the 3M ofces.
See www.3M.com/PeltorComms on the Internet. Look in
section “Rest of the world” and nd “CONTACT US” where
you will nd contact information.
DISCLAIMER
3M does not accept liability of any kind, be it direct or conse-
quential (including, but not limited to, loss of prots, business
and/or goodwill) arising from reliance upon any information
herein provided by 3M. The user is responsible for determining
the suitability of the products for their intended use. Nothing
in this statement will be deemed to exclude or restrict 3M’s
liability for death or personal injury arising from its negligence.