Specifications

16
© 2012 Emerson Climate Technologies, Inc.
Printed in the U.S.A.
AE8-1368 R2
4.15 Language
The LCD display on the CoreSense Diagnostics
control module can be set to display messages in
multiple languages. The available options are English,
Spanish, Portuguese, French and German.
4.16 Voltage Imbalance
The voltage imbalance setting determines the
maximum percentage of voltage imbalance on the
three compressor phases. If the measured voltage
exceeds the imbalance setting, the module will alarm
and shut down the compressor. The default setting for
this parameter is 5%.
4.17 Inputs
The compressor input values for each module are
located on the Input tab. To navigate to this screen
press Ctrl+3.
The E2 should look like Figure 4.12.
The input values as shown are automatically mapped
by the E2 during the commissioning process. This
takes place when the compressor associations are
made. Refer to Section 4.4 of this document for
additional details concerning this process.
4.18 Outputs
Similarly, the compressor output values for each
module are located on the Output tab. To navigate to
this screen press Ctrl+4.
The E2 should look like Figure 4.13.
As with the input values, the output values as shown
are automatically mapped by the E2 during the
commissioning process. This takes place when the
compressor associations are made. Refer to Section
4.4 of this document for additional details concerning
this process.
4.19 ID Confi guration
The ID Confi g tab contains information about the
compressor identifi cation such as the model and serial
number. To navigate to this screen press Ctrl+7.
The E2 should look like Figure 4.14.
It also contains additional fi elds for Customer ID,
Customer Name, and Location. These fi elds are
provided for the end user and are meant to be populated
during the commissioning process. This identifi cation
information can be useful when performing remote
compressor diagnostics.
Figure 4.13 – ISD Setup Screen (Outputs Tab)
Figure 4.14 – ISD Setup Screen (ID Confi g Tab)
Figure 4.12 – ISD Setup Screen (Inputs Tab)