Specifications

37
© 2012 Emerson Climate Technologies, Inc.
Printed in the U.S.A.
AE8-1368 R2
Is the control module to sensor module
communication harness properly plugged
into the connector (see photo below)?
Is the harness plugged into
the sensor module?
Properly plug the harness
into the connector
No
Remove the
Bottom cover of the
control module
Yes
No Communication to Sensor Module
Plug the harness into
the sensor module
No
6.16
This code results when the
sensor module communication
harness is unplugged for 1
minute, or the control module
fails to communicate with the
sensor module for 1 minute
Correct Connector
Orientation: Locking
Tab In Front
Incorrect :
Locking Tab To
Side
Locations on Control and Sensor Module
Communication Harness Connector
Orientation of communication harness
connector
Open the
terminal box
(Caution: High
Voltage on
Terminal Posts).
Replace the sensor
module
Yes