User manual

FP series user manual
Allis Electric - 13 - Rev3. July 2005
2. Installation
2.2 Installation in rack position
 Immovable
1. Align the mounting ears and secure with the supplied
screws.
2. Slide the UPS or battery module onto the fixed mounting
rails.
3. Secure the mounting ears to the posts.
4. Repeat the above steps for each UPS and battery module
until installation is complete.
The rack-
mount ears WILL NOT support the
weight of the UPS nor the battery module
.
They are used for mounting the UPS
and
battery module
onto the rack. Mounting rails
are required for each UPS or battery module. If
rails are not installed on the rack, then
please
contact
your service representative to order a
rail kit.