User manual

FP series user manual
Allis Electric - 23 - Rev3. July 2005
2. Installation
 Net Agent Ⅱ
ⅡⅡ
Ⅱ
(External) (Internal)
NetAgent II allows a user to obtain the status of and issue commands to the UPS. It also
provides other functions such as connecting to a modem to monitor the UPS when a permanent
connection to the internet is not available. Monitoring the status of such things as temperature,
humidity, water conditions, smoke detectors, gas detectors, and door and window detectors is
also possible with NetAgent II when it is connected to optional components. This product is for
“Contact Closure” and ”RS232” interface UPS. The communications protocol includes the
MegaTec/ PPC/ SEC 2400 / 9600. And user could also provide their own protocol to build in.
NetAgent II provides a simple and easy installation procedure. User only needs to install the
software in the NetAgent II CD on a Windows environment to configure the IP address.
All the other configurations could be accomplished in a Web browser. NetAgent II also provides
shutdown programs for different operating systems. Shutdown commands can be sent for such
events as power failure, low UPS battery condition, UPS overload, UPS overheating and scheduled
shutdowns. All shutdown events are configurable by the user. The shutdown software provides
an orderly shutdown to prevent the abnormal shut-off of clients or servers.
For more details about NetAgent II, please refer to the NetAgent II
installation CD.