MM701 7” LCD OVERHEAD MONITOR OPERATION MANUAL 1286534A.
IMPORTANT An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in ‘park’ or when the vehicle’s parking brake is applied.
Congratulations on your purchase of the Movies 2 Go MM701 drop-down Video Monitor. The MM701 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment. NOTE: Installation options vary, see the individual owner’s manuals for each component in your system to obtain a full understanding of each component’s operation.
FRONT PANEL FEATURES 2 1 10 2 9 3 8 4 5 6 7 MM701 4 1286534A.
FRONT PANEL 1. Infrared Transmitter – Used to transmit audio to wireless headphones. 2. Dome Lights – Provide additional interior illumination. 3. Power ON/OFF Select Switch – Turn the MM701 on and off. 4. Select Up Button – Adjust picture quality and source selection. 5. Select Down Button – Adjust picture quality and source selection. 6. Menu button – Display Contrast, Brightness, Tint, Color, Input Select (AV1 & AV2), Reset and Exit OSD. 7.
TURNING THE MM701 ON OR OFF 1. Sliding the screen release lock forward will unlock the LCD screen and drop down slightly. Move the screen downward and pivot it until a comfortable viewing angle is reached. The internal friction detent will hold the screen in position while the system is in use. 2. Move the POWER switch to the ON position. 3. After the unit is turned ON and begins to display a picture, adjust the viewing angle by pivoting the screen to optimize the picture quality. 4.
OPERATION OVERHEAD DOME LIGHTS The Dome Lights integrated into the MM701 are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle’s interior lighting. Do not leave the vehicle unattended with the dome light switch in the ON position, as this could result in a discharged battery.
REMOTE SENSOR The MM701 incorporates an Infrared sensor which relays signals from the remote control to allow an auxiliary source to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as a Video Cassette Player or DVD Player. The infrared sensor can relay signals from most manufacturer’s remote control to its respective component connected to the Video 1 and 2 inputs, such as a DVD player.
PICTURE ADJUSTMENT When watching the program, the quality of the picture can be adjusted to suit your taste. Press the MENU button, the main menu will appear. Then press the MENU button consecutively to select the item which you need to adjust. For example, press MENU button consecutively to select BRIGHTNESS and press UP / DOWN button to adjust the desired level.
SOURCE SELECT There are 2 inputs to select from in the Input Select Menu: AV1 and AV2. To select the input source, press MENU button consecutively to the item INPUT SELECT. Then, press UP / DOWN button to select AV1 or AV2. G R B CONTRAST BRIGHTNESS TINT COLOR INPUT SELECT RESET EXIT OSD AV1 EXIT THE MENU To exit the main menu, press MENU button to select EXIT OSD and press UP / DOWN button, the menu will disappear.
OPTIONAL ACCESSORIES WIRELESS HEADPHONES The MM701 includes a built in infrared transmitter for use with Movies 2 Go wireless headphones (PN MMIRHS). Turning the Wireless Headphone switch ON will activate the internal IR receiver and the volume can then be adjusted separately with the controls on each headset. Any number of wireless headphones can be used, but all must be within direct line of sight from the transmitter.
TROUBLESHOOTING 1. When there is No Picture ¨ ¨ ¨ Check that the signal source is connected. Check that AV1/AV2 is selected correctly. Contact the service department. 2. When the IR Sensor is Inoperative ¨ ¨ ¨ Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. MM701 12 1286534A.
SPECIFICATIONS LCD Backlighting Resolution Pixels Operation Temperature Storage Temperature Edge Light Tube 800 X 480 800 X 480 X 3 0 - 50º C -20 - 70º C Expected Backlight life 10,000 Hours Video Display System NTSC / PAL MM701 1286534A.
12 MONTH LIMITED WARRANTY Applies to AEC Mobile Video Products AEC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
