aee.com Content Conventions..............................................................................................................................................................................................................................................2 Overview ...........................................................................................................................................................................................................................................
aee.com Quadcopter User Manual V1.0 2015.8 Please read this "User Manual "carefully before using Quadcopter. Conventions Except when specifically stated, all Quadcopter features described in this manual are for Quadcopter Operating Modes. Warning : (1) When installing the propellers, rotate the propellers strictly in the lock direction specified by the mark, and DO NOT apply too much force in order to avoid possible damage.
aee.com Overview The quadcopter is a high-tech electronic with integrated flight and camera control. When install camera, you can use mobile devices to control the camera through the App and achieve real-time video images. The quadcopter will help you capture clear an stable aerial videos and photos. Note:The camera operation as mentioned below, is only applied for the operation of the AEE S61. 1 Kit Contents Before using, please check all items inside the kit box. No.
aee.com 12 Screws 1 pcs 13 Lanyard 1 pcs 14 Propeller Guards 1 set 15 CD 1 pcs 16 Micro SD card (16GB/32GB For Wi-Fi Repeater (optional) Remote control Lanyard Including 4 Propellers Guards and 8 screws. Containing User Manual, etc..
aee.com 2 Quadcopter Introduction Adopting high-standard integrated design . If it is equiped with professional airborne photography equipment and a Wi-Fi Repeater, Quadcopter provides excellent flight and aerial photography for outdoor or large indoor spaces. You only need to follow some simple installation steps before flight and taking aerial pictures. You can control the Quadcopter through the Remote control, and can view flight video through mobile devices.
aee.com Device Power Supply Remote control Load 4 AA batteries for power supply Wi-Fi Repeater Wi-Fi Repeater should be charged through the inbuilt charging port (Mini USB port) Quadcopter Charge quadcopter batteries for power supply Mobile devices Please ensure that your mobile device is fully charged before using App The following instructions are for the quadcopter battery. 1.
aee.com 1.3 Quadcopter Battery Installation Push the battery into the battery compartment in the correct direction (Figure 7). After the battery is properly installed, a “click” sound will be heard, indicating that the battery has been fastened. An incorrectly installed battery may cause ● Bad contact ● Affect flight safety ● Inability to take off. Figure 7 1.4 Quadcopter Propeller Guard Attachment Instructions Please follow the below instructions to attach your Quadcopter Propeller Guards.
aee.com [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 8 ] [ 9 ] [11] [ 7 ] [10] [12] Figure 8 [ 1 ] Propeller [ 2 ] Motor [ 3 ] Front Indicator [ 4 ] Landing Gear [ 5 ] Camera [ 6 ] 3-Axials Gimbal [ 7 ] Quadcopter Battery [ 8 ] Tail Indicator [ 9 ] Power Switch [ 10 ] Rear Indicator [ 11 ] Battery Level LCD Segment Display [ 12 ] Battery Level Check Button 2.
aee.
aee.com 2.4.2 Install the Camera: Install the camera onto the quadcopter and fix the clip to the camera reliably as shown in Fig. 9b to prevent the camera coming off.Then connect camera and the gimbal with USB cable (only for AEE S61). Diagram of installation of PTZ USB cable Figure 9b 2.5 Airborne Camera With S61 camera installed on the quadcopter, You can take photos and record videos with the camera function button. Camera also can be set by App.
aee.com Indicators on the remote control Power indicator Red light ● Photo shooting & video Status indicator(tri-color light) recording indicator Red light ● /green light ● /blue light ● Green light ● Function status Remaining ON N/A N/A Power on Remaining ON Red light remains ON N/A Abnormal condition, as signal loss etc.
aee.com (1) Propellers are designed to self-tighten during flight; therefore do not tighten them excessively. Do not use glue on the threads. (2) Ensure propellers are attached in the correct position. The quadcopter cannot fly properly if the propellers are installed incorrectly. Wear protective gloves while installing as propellers are very thin and may cause accidental scratches. 3.
aee.com No.
aee.com For maximum range and reliability, Remote control antenna should point skyward with no obstructions between it and the receiver antenna on Quadcopter. Obstructions may cause you to lose control of the quadcopter. Ensure mobile device holder and Repeater do not block the antenna. Figure 15 4.4 Operating the Remote control Joystick at center / neutral: Control joysticks of remote control are at the central position.
aee.com The S2 switch is used for calibration of the joystick. Turn S2 to position 3, then turn on the remote control, and at this time the status indicator starts blinking (indicating joysticks calibration starts). Turn the left and right joysticks clockwise and counter-clockwise respectively at the maximum stroke for two circles, and then release the S2 NULL S2 OK S2 joysticks.
aee.com Blue light blinks slowly (3s OFF,0.3 ON) Wi-Fi Repeater is successfully paired 5.1.2 Power Indicator Indicates Repeater’s power supply status. Power Indicator Description Red light is ON Repeater power supply is normal or charging completes Red light blinks Repeater is charging, or Repeater power is running out, please charge as soon as possible 5.1.
aee.com [2] Power indicator Power indicator is red [3] Statu indicator Status indicator is green [4] Contacts Charging contacts. ※Note: 1. Code pairing process: turn on the tracker and trigger its code pairing function; turn on the quadcopter, and its built-in 5.8GHz module will auto proceed with the code pairing process. In the code pairing process, the distance between the tracker and quadcopter should be less than 10m. 2.
aee.com the camera face the tracker. ※ Case 3: if the quadcopter is flying at a distance >100m (beyond the tracker’s communication distance) away from the tracker, when you turn S4 mode switch to “F-M”, the quadcopter’s flight status (e.g. hovering) will remain unchanged. 7 Downloading and Installing AEE AP+ App (Only for AEE S61 camera) Download AEE App (iOS / Android) Scan QR Code above Download the AEE AP+ App to watch live video when using Quadcopter, through the following method.
aee.com 1.
aee.com There are totally four bars used to indicate in a real-time manner the remaining battery level of the quadcopter; 1 [2] Quadcopter battery level [3] Wi-Fi signal intensity [4] Flight parameter icon bar indicates 25% of the battery life is left; 2 bars indicate 50% left; 3 bars indicate 75% left; 4 bars indicate battery is full.The level status changes with the flight. [5] Distance between quadcopter and home point Shows in a real-time manner the intensity of Wi-Fi signal of mobile device.
aee.com 1 2 3 4 5 GPS NRM F M S4 After the quadcopter powers Toggle the joysticks to the on(about 20 seconds). Swich S4 position as in the follow figure. horizontally Rotate Quadcopter 360° vertically leftward)until green lights off, Put for more than 5 times between Front indicator (green) starts 2 turns (Nose down ) Quadcopter on the ground. Green GPS and Follow Me mode. The blinking ,Then release the lights up normally after light off→ quadcopter will enter calibraion joysticks.
aee.com ● Do not execute CSC during normal flight. This will stop the motors and cause the quadcopter to drop without control. ● Toggle the joysticks quickly and accurately when performing CSC. Release the joysticks simultaneously after the motors starts or stops. ● Shutdown remote control must be after the quadcopter power off. Otherwise, the quadcopter will enter the return mode, then may case the high-speed rotation of the propeller. 3 Basic Flight 3.
aee.com 5 Low Battery Level Alarm Function When quadcopter battery power is low, you must land as soon as possible, or else the quadcopter may lose power completely and crash, damaging the quadcopter or creating a dangerous situation. In order to prevent danger caused by low battery, Quadcopter defines Level 1 low voltage alarm (battery level under 50%) and Level 2 low voltage alarm (battery level under 20%), and sends alarms with indicators on the quadcopter and on the Remote control .
aee.com Browse file to be burnt Language selection Program Name Current Version Choose Version Update The interface of the software upgrade interface on PC is very simple. It is mainly divided into two areas: main control program burning area, PTZ program burning area. 4.Upgrade Steps 1) Open the software. 2)Connect the device (e.g., Quadcopter) to the PC via the data cable; now the information of the connected PC serial port will be displayed.
aee.
aee.com Appendix 1 Description of Common Indicators Normal State Front and Rear Indicators remain ON; Tail Indicator remains on. The GPS signal is strong enough.
aee.com 3.2.1 Situations requiring recalibration 1) The accelerometer data are abnormal; the four arm lights blink fast. 2) The mechanical structure of the quadcopter changes. 3) The drift distance is significant during flight. 3.2.2 Calibration steps 1 2 3 4 5 After the quadcopter is normally powered on, turn the S4 switch on the remote control between positions 1 and 3 for more than 5 times (i.e.
aee.com 3.4 Quadcopter is out of sight and the Wi-Fi is disconnected Turn off the remote control and let the quadcopter automatically return. Ensure there are no obstructions on the quadcopter’s return path, and ensure you are familiar with the procedures on how to regain control of the quadcopter. Turn off the Remote control to trigger the Failsafe mode and the quadcopter will start to fly back, descend, and land at the Home Point.
