Operation Manual

aee.com
-16-
b. Continuous capture (three)
On the camera setup interface, press the “+” or “–” key and choose “Single Photo”. Press “OK” to display the
interface. Press the “>” key, and choose Continuous capture (three). Press “OK” again to exit the interface. Press the
“M” key to exit the camera setup interface. After setting is complete, the SD21 video camera continuously takes three
pictures when you press the Photo key once.
c. Auto cont capture
On the camera setup interface, press the “–” key and choose “Auto Cont Capture”. Press “OK” to set the time interval
for continuous shooting to OFF, 1s, 2s, 3s, 5s, 10s, 20s ,30s or 60s . After press the “>” key to set the time interval.
Press “OK” again to exit the intreface. Press the “M” key to exit the setup interface. At this time, if you press the
“Photo” key, the SD21 video camera takes a picture at each interval until you press the “Stop” key to cancel shooting.
d. Timed shooting
On the camera setup interface, press the “+” key and choose “Timed Shooting”. Press “OK” to set the time in
auto-shooting mode to OFF, 3 s, 5 s, or 10 s. Press the “>
” key, and choose “Timed Shooting”. Press “OK” again to
save and exit the interface. Press the M key to exit the camera setup interface. After setting is complete, the SD21 video
camera starts reverse-counting timer when you press the Photo key once. When the preset time is reached, the SD21
video camera takes a picture.
5. Recording an Audio File
To record an audio file, perform the following operations:
— Press the “M” key on the video camera setup interface, choose “ Exe. ”., and then press “OK” to display the video and
audio options.
— Press the “<” or “>” key, and choose ” “ for audio only, and press ”OK” again. The system gets ready for audio
recording.
— Press the “Video” key to start recording an audio file. At this time, the green indicator blinks slowly. The video camera
also displays the audio recording symbol on the TFT screen and starts counting time. In addition, the recording duration
is correctly displayed on the LCD segment screen.
— Press the “Stop” key to save and stop the currently recorded audio file. At this time, the green indicator on the front
side is off. The video camera restores to the preview state for audio recording. The recording duration also disappears
on the LCD segment screen.