Operation Manual

http://www.aee.camera/

Startup

Hold down the "Power / Record" button for about 5 sec to start the

Wi-Fi based remote control.

After startup,

the screen will display the battery icon " "; if the

battery icon is empty, it indicates that the battery level is low and

charging is needed; please connect the USB power supply to the

USB port of the remote control for charging.

Pairing

Please carry out pairing before enabling the functions of the remote

control. Steps for pairing between the Wi-Fi based remote control and

the camera are stated as follows:

1. Turn on the camera and enable the Wi-Fi function;

First, press and hold the "Stop" Button on the Wi-Fi remote control;

then, hold down the "Power / Record" record for about 5 sec to

start the remote control. The red power indicator will stay on and

the screen will display the battery icon " ";

Hold down the "Power/Record" button and the "Stop" button, and

do not release these two buttons until the following icon of "WAIT

HOST PBC" appears.