Parts List

- 17 -
When obstacle (pay attention to dead zone) occurs within distance of 6.5616798(ft) at front of drone,
the takeoff will be locked and the interface of remote control will prompt obstacle within 6.5616798(ft);
Not: 1. The radar function is enabled in “POS HOLD Mode” only; in this flight mode, the user may enable
or disable the radar.
2. The radar will be disabled automatically in “ATTI Mode” and the user should use the drone with
caution in this mode.
2.8 RTK
2.8.1 System composition
Drone, remote control and RTK base station
2.8.2 Use process
Put the three components, i.e. drone, remote control and RTK base station, at the open and unblocked
outdoor space, turn on them respectively and check their working status.
2.8.3 Drone
Once the drone is started, the general satellite and high-accuracy satellite locating and searching function
will work simultaneously; when satellite is located and locked, the tail light of drone will become green;
the flight control system will compare the satellite searching quality and effect, and have auto switching
between GPS- general mode and RTK high-accuracy locating mode; the status light at drone end has
no prompt, and the locating status and mode can be viewed from the remote control;
Remote control
The remote control should clearly indicate the information, such as satellite locating mode, status and
satellite quantity. The details are as follow:
GPS mode (general):
a. Mode display: GPS logo is marked at the upper left corner of current satellite icon;
b. Locating status: The icon, letter and figure will become grey when it is not located, or become green
when it is located.
c. Satellite quantity: Maintain the existing display mode and have real-time display of satellite quantity.
RTK mode (high accuracy):
a. Mode display: The RTK-R (real-time RTK) and RTK-N (network RTK) are marked at the upper left
corner of current satellite icon.
b. Locating status: The icon, letter and figure will become grey when it is not located, or become blue
when it is located.
c. Satellite quantity: Maintain the existing display mode and have real-time display of satellite quantity.
2.8.4 Schematic diagram for icon position of remote control is as follows:
AEE Unmanned Aircraft System
s o lProfes i na Leading