Parts List

- 19 -
AEE Unmanned Aircraft System
s o lProfes i na Leading
4. Power-off protection: When battery is turned on, but no electrical device is connected, the battery
will enter power-off (shutdown) status within 5min, in order to maintain its battery level.
5. Communication: The real-time battery information can be viewed in the setting of remote control,
such as battery voltage, current, battery level and charging times.
Note: Please read the Manual, disclaimer and rules on battery surface carefully and follow them strictly
before use; otherwise, the consequences caused therefrom should be undertaken by the user.
3.3 Use of intelligent battery
3.3.1 Intelligent battery on/off
Intelligent battery on: firstly short press the on/off button once when intelligent battery is off and then
long press it for over 2s, to turn on the battery. When battery is on, the power indicator will be on in
turns and the green indicator will be normally on. The power indicator shows current battery level.
Intelligent battery off: firstly short press the on/off button once when intelligent battery is off and then
long press it for over 2s, to turn off the battery. When intelligent battery is off, the power indicator will
be off in turns.
3.4 View battery level
Short press the on/off button once to view the current battery level when intelligent battery is off.
3.4.1 The power indicator can display the battery level during charging/discharging. The definition of
indicator is as follows:
3.4.2 Charging
1. Connect AC power to AC power supply.
2. Connect intelligent battery and charger when intelligent battery is on or off.
3. Under charging status, the battery level indicator of intelligent battery will flicker circularly and indicate
the current battery level.
4. The intelligent battery is fully charged when all battery indicators are off. Please disconnect the
intelligent battery from charger and unplug the charger plug, to complete the charging.
5. The intelligent battery, which is hot after completion of flight, must be cooled to room temperature
before being charged.
Note: Make sure the intelligent battery is off before pushing it in or out from the drone. Do NOT insert
or unplug the battery when the battery is on.
“■” “ ” “ ”
Discharge state charging
LED1 LED2 LED3 LED4
instruct
■ ■ ■ ■
80~100%
■ ■ ■
60~80%
■ ■
40~60%
■
20~40%
Less than 20%
Slow flashing: once every 1 second, fast flashing: once every 0.5 second. The charging status is flashing
in the form of a marquee
LED1 LED2 LED3 LED4
instruct
■ ■ ■
■ ■ ■ ■
■ ■
■
Abnormal battery
99~100%
80~99%
60~80%
40~60%
Less than 20~40%
Abnormal battery
LED indicator is normally on
Indicates that the LED
light flashes slowly
Indicates that the LED
light flashes quickly