User's Manual

- 2 -
☆Ensure that the drone is the center of the circle when taking off and landing, and there are no
moving people or obstacles within a radius of 30 foot. When operating this AEE unmanned aircraft
system product, the drone should only be allowed to fly in a safe area away from the crowds, and it
is important to pay attention to your own safety and people around you.
☆Please ensure that each waypoint has a sufficient altitude (the altitude of a waypoint is that relative
to the take-off position of the drone) when editing the waypoints in order to prevent the flight route
from intersecting with mountains or buildings, which will result in the collision between the drone and
mountains or buildings during the flight.
☆Remove the protective rubber plugs when using the power battery, and put the rubber plugs back
in place after using to avoid short-circuit damage to the battery.
☆Remove the protective rubber plugs when using the power battery, and put the rubber plugs back
in place after using to avoid short-circuit damage to the battery.
☆Be sure to remove all the accessories installed on the aircraft and put them back in place after the
flight mission is completed to avoid damage to the accessories due to improper operation.
☆Please charge and discharge batteries at least once every three months to maintain the battery
(battery of UAV and remote controller).
☆Hold the fuselage when moving the drone. Do not hold the drone arm or landing gear separately,
so as to avoid damage caused by improper use.
☆Keep away from heat sources to avoid the aging deformation or even melting damage of
thermoplastic materials of the drone caused by high temperature.
☆Please follow the user's manual and do not operate in violation of local laws and regulations for
the safety of your life and property.
AEE Unmanned Aircraft System
s o lProfes i na Leading